Wide Use Metal Chamber
PROMETHEUS
日本国外でLayLax商品をお買い求めのお客様へ
Direct international shipping is not available. Please check below for your local retailers.
Find Local Retailers
※当製品は18歳以上を対象とした遊戯銃に使用する目的で作られたカスタムパーツです。※本来の目的以外には使用しないでください。※品質には万全を期しておりますが、ご使用前に破損がないか確かめてください。万一、不具合があった場合は使用しないでください。※間違った使用による破損及び事故等には当社は責任を負いませんので注意してお取扱いください。※保管の際は小さなお子様の手の届かない所へ保管してください。※直射日光の当たる場所や炎天下の車内、または高温多湿の場所に長時間放置されますと変形、変色、劣化する恐れがあります。※本体に強い衝撃を与えると、変形や破損の恐れがあります。※ご使用状況や経年劣化により変色する場合があります。※製品はロットごとに予告なく若干の仕様が変更される場合がございます。
Prometheus Wide Use Metal Chamber
●Stepless rotary-type hop up chamber
●Compact and highly versatile
This rigid die-cast metal chamber is compatible with a wide range of M4 variant rifles. The rotary dial is stepless allowing for extremely precision hop adjustments to improve your accuracy. The included barrel clip fastens seamlessly to the chamber and barrel to prevent barrel wobble and rotation.
■BRAND: PROMETHEUS
■Package Design/JAN:
・Prometheus: 4571443147011
・G&G: 4571443147028
・KRYTAC: 4571443147035
※The internals of the chambers are identical, only the package design differs.
■COMPATIBILITY:
G&G ARMAMENT M4 Series
・ARP9
・ARP556
・CM16
・GC16
・Fire Hawk
・Fire Hawk HC05
KRYTAC M4 Series
・TRIDENT
・LVOA-C
・LVOA-S
・Barrett Rec 7
※Not compatible with the KRISS Vector、TRIDENT47 CRB(TR47)
■INSTALLATION
1. Attach the rotary dial to the back of the hop up chamber and attach the O-ring.
2. Place the bucking onto your barrel and insert the barrel into the opening of the chamber.
3. Attach the barrel clip and slide on the barrel ring. ※for KRYTACs, please use the original barrel spring instead of the barrel ring.
4. Insert the hop up nub or tensioner into the hop up window in the chamber.
5. Install the hop arm and secure it with the retaining pin.
■NOTICE:
※The picture shown is a product sample, the actual color and specification may vary.
・NOT compatible with Tokyo Marui guns without some modification.
・Hop up bucking, and nub/tensioner are NOT included.
・For best results, consider use the Prometheus bucking, nub/tensioner and inner barrels for the best fit.
・If double feeding or misfeeding occurs please check the fit of the magazine, receiver, and outer barrel when installing any hop up chamber as there might be some play when mixing parts.
・Be careful not to overtighten screws or bolts when installing your parts.
・The product is designed and refined to reduce play and wobble as much as possible be sure to secure all adjacent parts for maximum performance.
Choose options