ARES AMOEBA EFCS Custom Adjustable Trigger
PROMETHEUS
日本国外でLayLax商品をお買い求めのお客様へ
Direct international shipping is not available. Please check below for your local retailers.
Find Local Retailers
*This product is a custom part designed for use with amusement guns intended for ages 18 and older. Please do not use it for any purpose other than its original purpose. *Although every effort has been made to ensure the quality of the product, please make sure there is no damage before use. Do not use the product if it is defective. We are not responsible for damage or accidents caused by incorrect use, so please handle with care. Please keep out of reach of small children when storing. *The product may deform, discolor, or deteriorate if left in direct sunlight, in a car under the blazing sun, or in a hot and humid place for a long period of time. *If the product is subjected to strong impact, it may be deformed or damaged. The product may discolor due to usage conditions or deterioration over time. *Specifications are subject to change slightly from lot to lot without notice.
ARES AMOEBA EFCS Custom Adjustable Trigger
●Fully adjustable trigger pull length as well as trigger response
●Serrated straight trigger for easier grip and rapid semi-auto firing.
Built for the Ares Amoeba EFCS series of rifles, this new custom trigger is highly adjustable and will improve your trigger response significantly. Due to two independently placed grub screws, you can adjust both the trigger pull length or response, as well as the trigger's stroke/angle. The stroke can be adjusted from outside of the gearbox at anytime, while the trigger pull adjustment is made when installing the trigger inside of the gearbox.
This makes for a much easier method of tuning your rifle's trigger to your taste. Additionally the serrated straight trigger pad allows for maximum grip and rapid semi-auto firing.
■Brand: Prometheus
■Included: ARES EFCS custom trigger x1
■Compatible Models:
・ARES AMOEBA EFCS M4 Series (※M45 excluded)
■Material: Aluminum Alloy
■Color/JAN:
Black: 4571443167545
Silver: 4571443167552
Gold: 4571443167569 ←WEB LIMITED
Crimson: 4571443167576 ←WEB LIMITED
■Adjusting:
●Grub screw A: Adjusts the trigger length/pull. (Response)
●Grub screw B: Adjusts the trigger stroke/angle. (Stroke)
1. In order to install and adjust your response and stroke lengths, first loosen grub screw A, and then install it into the gearbox. Gradually adjust grub screw A to desired trigger response between grub screw A and the trigger switch.
CAUTION: Before fully reassembling the gearbox, please check to see if the safety mechanism engages, if you shorten the trigger response too much, the safety will cease to function.
2. After the gearbox is reassembled and placed back into the receiver of your Ares Amoeba, adjust grub screw B to adjust the angle/stroke of the trigger. There is a small screw hole that be accessed using an allen key from the outside of the gearbox while the gearbox is installed.
CAUTION: Over tightening grub screw B can prevent the trigger from engaging or releasing the trigger switch fully.
※A L-shaped allen wrench (1.27mm) is required to adjust the trigger stroke from the outside of the gearbox.
※It is advised that you use medium-strength screw lock to keep the adjustment screws from coming loose.
※You can utilize our shim set for additional horizontal trigger placement and to reduce play of the trigger.
■CAUTION:
※The picture shown is a product sample, the actual color and specification may vary.
※Gun and other parts sold separately.
※Color may vary depending on the production time.
Choose options