Carbon Barrel Piece[FirstFactory]
F.FACTORY
お1人様3点まで
日本国外でLayLax商品をお買い求めのお客様へ
Direct international shipping is not available. Please check below for your local retailers.
Find Local Retailers
*This product is a custom part designed for use with amusement guns intended for ages 18 and older. Please do not use it for any purpose other than its original purpose. *Although every effort has been made to ensure the quality of the product, please make sure there is no damage before use. Do not use the product if it is defective. We are not responsible for damage or accidents caused by incorrect use, so please handle with care. Please keep out of reach of small children when storing. *The product may deform, discolor, or deteriorate if left in direct sunlight, in a car under the blazing sun, or in a hot and humid place for a long period of time. *If the product is subjected to strong impact, it may be deformed or damaged. The product may discolor due to usage conditions or deterioration over time. *Specifications are subject to change slightly from lot to lot without notice.
●Outer barrel with the distinct carbon look
●Reduces the overall weight for more maneuverability
●Available in 3 lengths to be used with our "M4 Outer Barrel Base".
Outer barrel piece mainly made from carbon. Available in 3 lengths to match our “M4 outer barrel base” to form 5 inches, 7 inches, and 9 inches overall barrel length. Also compatible with our series of standard AEG, NGRS, M4 GBB, SIG AIR MCX, and MPX outer barrel base (total length of the barrel may vary by the chosen barrel base). Our “M4 Barrel Piece” can be utilized to adjust the overall length.
■Brand: F.FACTORY
■Barrel Weight:
・5 inches approx. 27g
・7 inches approx. 34g
・9 inches approx. 40g
■Barrel Length:
・5 inches approx. 108mm
・7 inches approx. 158mm
・9 inches approx. 209mm
(Muzzle thread length excluded)
■Thread Pitch: 14mm CCW
■Materials: Carbon (Barrel Structure), Aluminum Alloy (Threads)
■Compatible Outer Barrel Base:
・Standard M4 AEG Outer Barrel Base
・Standard M4 AEG Outer Barrel Base Short
・NGRS M4 Outer Barrel Base
・M4 MWS Outer Barrel Base
・SIG AIR MCX Outer Barrel Base & Gas Block Base Set
・SIG SAUER ProForce MPX AEG Outer Barrel Base & Battery Spacer
Caution:
This product requires the outer barrel base to be installed.
Overtightening the product may cause the product to break.
Please make sure to use an inner barrel which is as long or longer than the outer barrel.
We recommend to tighten the barrel after the inner barrel has been installed to the outer barrel piece.
■inch/JAN:
・5inch 4571443188717
・7inch 4571443188724
・9inch 4571443188731
※当製品単体では銃本体への取付けが出来ません。必ず上記の当社製アウターバレルベースシリーズと併せてご使用ください。
※インナーバレルは必ずマズル側先端までの長さがあるものをご使用ください。アウターバレルよりインナーバレルが短い場合、BB弾がアウターバレル内で当たり破損する恐れがあります。
※構造上、先にアウターバレルベース、バレルピース、マズル等を締めこむとインナーバレルが入らなくなる場合があります。その際は、先にインナーバレルを通してから締めこんでください。
※カーボンの性質上、無理な力を加えると破損する恐れがあります。
Choose options