![Hard Cut-Off Lever for P-90 [PROMETHEUS]](http://laylax.com/cdn/shop/files/HardCutOffLeverforP-90_0000_00.jpg?v=1759975758&width=2000)
![Hard Cut-Off Lever for P-90 [PROMETHEUS]](http://laylax.com/cdn/shop/files/HardCutOffLeverforP-90_0001_01.jpg?v=1759975756&width=2000)
![Hard Cut-Off Lever for P-90 [PROMETHEUS]](http://laylax.com/cdn/shop/files/HardCutOffLeverforP-90_0002_02.jpg?v=1759975757&width=2000)
![Hard Cut-Off Lever for P-90 [PROMETHEUS]](http://laylax.com/cdn/shop/files/HardCutOffLeverforP-90_0003_03.jpg?v=1759975757&width=2000)
![Hard Cut-Off Lever for P-90 [PROMETHEUS]](http://laylax.com/cdn/shop/files/HardCutOffLeverforP-90_0004_04.jpg?v=1759975757&width=2000)
Hard Cut-Off Lever for P-90 [PROMETHEUS]
PROMETHEUS
日本国外でLayLax商品をお買い求めのお客様へ
Direct international shipping is not available. Please check below for your local retailers.
Find Local Retailers
This product is a custom part designed for use in toy guns intended for those 18 years of age and older. This series of products generally requires disassembly and assembly. We assume no responsibility for any damage or accidents to the parts or the gun itself during assembly. If you are unsure of your skills, please consult your retailer. Please note that we assume no responsibility for any damage or accidents to the parts or the gun itself caused by improper handling. There is a risk of injury from sharp edges or burrs. Please handle with care as we assume no responsibility. Do not use our products in conjunction with other companies' products, as this may result in performance degradation, damage, or deformation. The installation of this product may affect bullet velocity and trajectory. Electric guns use electricity, so please be careful of electrical leakage and short circuits during assembly and use. We assume no responsibility for any accidents that may occur. Product specifications are subject to change without notice.
●Improved semi-automatic operation!
●Improved burst symptoms when firing semi-auto!
●Lightweight design improves gear tracking!
●Uses duralumin, which is strong, durable, and wear-resistant!
This cut-off lever features a redesigned shape and material to address bursting and poor response in semi-auto mode due to high-cycle settings and wear. The P-90's cut-off lever operates not only in semi-auto mode but also in full-auto mode, causing the area that comes into contact with the sector gear cam to wear out faster than other models. To address this issue, we've adopted duralumin, which offers excellent strength, durability, and wear resistance! Not only has it improved in strength, but it's also approximately 50% lighter, improving the sector gear's ability to follow the cam. Additionally, the shape of the area that comes into contact with the sector gear cam has been optimized, making it easier to use in high-cycle settings.
*The screws are designed to have minimal play to increase operational accuracy. Due to dimensional errors in the gearbox, etc., movement may become stiff when tightening the screws. In this case, apply lubricant to the surface that comes into contact with the gearbox, or apply thread locking agent to the screws, and then tighten the screws slightly loosely.
*The spring guide is offset to the outside of the mechanism box to improve the tracking ability of the switch. It may protrude slightly outside the mechanism box, but this is not a defect.
Compatible models: Tokyo Marui Standard Type P-90 electric gun
・P-90 Plus ・P-90 TR
P-90 Version Len, P-90 Plus Version Len Electric Gun High Cycle Custom, PS90 HC
Choose options